DronesWear

With this app you can control some Parrot drones and pilot them with your Android wear device.

Usage

1. Connect your phone to the drone's Wifi.

If an Android notification asks you if you want to stay connected even

if there is no internet connection, please answer yes.

2. Open the app on your phone and on your watch (no precise order required).

3. Wait for the app to connect to your drone (a message will inform you about the status)

4. Now that you're connected, the action button is displayed on the watch.

5. Just move your wrist gently and see how the drone moves :)

6. For the flying drones, you can change the orientation and altitude with a joystick (up and down for altitude, right and left for orientation)

If disconnections appear to often, be sure that your drone is on a 5ghz Wifi (if your country laws authorize it). You can change the Wifi band of your drone with the official Parrot app FreeFlight3.

Please also note that connection on BLE drones might take up to 30 seconds.

You can control these Parrot drones:

- Bebop

- Bebop 2

- Jumping Sumo

- Jumping Race

- Jumping Night

- RollingSpider

- Airborne Cargo

- Airborne Night

With the flying drones, you can take off and land,

and also control the drone on pitch and roll

(make them fly forward, backward, on left and right). You have also a joystick on the second page (on your watch). With this joystick, you can control the altitude and orientation of the drone.

On the handheld device, you can at any time stop the propellers

in case of emergency.

You can pilot the jumping drones with the watch. You can also make them jump.

Security

At any time, you can stop piloting the drone with the *pilot from wear* switch button

on your phone. Switching it off will make the flying drones hover

and the jumping ones stop moving.

The code of this app is fully open sourced. You can found it here: https://github.com/Parrot-Developers/DronesWear

This app uses the Parrot Drone SDK (version 3.8.1).

Documentation of this SDK is available here: http://developer.parrot.com/

Dengan aplikasi ini Anda dapat mengontrol beberapa drone Bayan dan uji coba mereka dengan perangkat memakai Android Anda.

Penggunaan

1. Hubungkan telepon Anda ke drone ini Wifi.

     Jika pemberitahuan Android menanyakan apakah Anda ingin tetap terhubung bahkan

jika tidak ada koneksi internet, jawab ya .

2. Buka aplikasi pada ponsel Anda dan di jam (tanpa urutan yang tepat diperlukan).

3. Tunggu aplikasi untuk terhubung ke drone Anda (pesan akan memberitahu Anda tentang status)

4. Sekarang bahwa Anda terhubung, tombol aksi ditampilkan pada jam tangan.

5. Hanya memindahkan pergelangan tangan Anda dengan lembut dan melihat bagaimana drone bergerak :)

6. Untuk drone terbang, Anda dapat mengubah orientasi dan ketinggian dengan joystick (atas dan bawah untuk ketinggian, kanan dan kiri untuk orientasi)

Jika pemutusan tampak sering, pastikan bahwa drone Anda pada 5GHz Wifi (jika hukum negara Anda otorisasi). Anda dapat mengubah band Wifi dari drone Anda dengan FreeFlight3 aplikasi Bayan resmi.

Perlu diketahui juga bahwa koneksi pada drone BLE mungkin memakan waktu hingga 30 detik.

Anda dapat mengontrol drone Bayan ini:

- Bebop

- Bebop 2

- Jumping Sumo

- Jumping Balap

- Jumping Malam

- RollingSpider

- Airborne Cargo

- Airborne Malam

Dengan drone terbang, Anda dapat lepas landas dan mendarat,

dan juga mengontrol drone di lapangan and roll

(Membuat mereka terbang maju, mundur, kiri dan kanan). Anda juga memiliki joystick pada halaman kedua (di jam). Dengan joystick ini, Anda dapat mengontrol ketinggian dan orientasi pesawat tak berawak.

Pada perangkat genggam, Anda dapat setiap saat menghentikan baling-baling

dalam keadaan darurat.

Anda dapat pilot drone jumping dengan menonton. Anda juga dapat membuat mereka melompat.

Security

Pada setiap saat, Anda dapat menghentikan uji coba pesawat tak berawak dengan * percontohan dari keausan * tombol switch

pada ponsel Anda. Mematikan itu akan membuat drone terbang melayang-layang

dan orang-orang melompat berhenti bergerak.

Kode dari aplikasi ini adalah sepenuhnya open source. Anda dapat menemukannya di sini: https://github.com/Parrot-Developers/DronesWear

Aplikasi ini menggunakan Parrot Drone SDK (versi 3.8.1).

Dokumentasi SDK ini tersedia di sini: http://developer.parrot.com/

With this app you can control some Parrot drones and pilot them with your Android wear device.

Usage

1. Connect your phone to the drone's Wifi.

If an Android notification asks you if you want to stay connected even

if there is no internet connection, please answer yes.

2. Open the app on your phone and on your watch (no precise order required).

3. Wait for the app to connect to your drone (a message will inform you about the status)

4. Now that you're connected, the action button is displayed on the watch.

5. Just move your wrist gently and see how the drone moves :)

6. For the flying drones, you can change the orientation and altitude with a joystick (up and down for altitude, right and left for orientation)

If disconnections appear to often, be sure that your drone is on a 5ghz Wifi (if your country laws authorize it). You can change the Wifi band of your drone with the official Parrot app FreeFlight3.

Please also note that connection on BLE drones might take up to 30 seconds.

You can control these Parrot drones:

- Bebop

- Bebop 2

- Jumping Sumo

- Jumping Race

- Jumping Night

- RollingSpider

- Airborne Cargo

- Airborne Night

With the flying drones, you can take off and land,

and also control the drone on pitch and roll

(make them fly forward, backward, on left and right). You have also a joystick on the second page (on your watch). With this joystick, you can control the altitude and orientation of the drone.

On the handheld device, you can at any time stop the propellers

in case of emergency.

You can pilot the jumping drones with the watch. You can also make them jump.

Security

At any time, you can stop piloting the drone with the *pilot from wear* switch button

on your phone. Switching it off will make the flying drones hover

and the jumping ones stop moving.

The code of this app is fully open sourced. You can found it here: https://github.com/Parrot-Developers/DronesWear

This app uses the Parrot Drone SDK (version 3.8.1).

Documentation of this SDK is available here: http://developer.parrot.com/